Additives and functional resins for coatings and inks
New energy, semiconductor additives
XOANONS® Polyether modified silicon leveling agent
Low foam stability. Not easy to produce prickly in two-component systems.
Model number
XOANONS®WE-D5431
Specification
Composition: Polyether modified polydimethyl siloxane
Appearance: Transparent to slight yellowish clear liquid
Solvent: ----
Density: 1.02-1.06g/ml(25±1)℃
Viscosity: 100-1500mPa·s(Rotational viscometer method)(25±0.2)℃
Active content: 100%
Flash point: ＞100℃
Note: This data sheet is intended to give typical results, not standard.Subject to COA.
Application system
Water-based, Solvent-based, UV Cure
Properties
?Excellent varnish compatibility.
?Low foam stabilisation. Use in two-component systems. Less prickly even in wet weather.
?Moderate reduction of surface tension of the system.
?Moderate reduction of the coefficient of friction of the paint film surface. Slip properties, improved scratch resistance.
?Good recoatability. Suitable addition amount and baking temperature conditions have minimal effect on interlayer adhesion.
Incorporation
Diluted before addition, added in any stage including post-adding.
Suggest addition
Addition to total formulation 0.05-0.5%
Storage stability
Keep intact 24 months in original package. Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.
Application recommendation
Transparency in varnish 5
Unstable foaming 4
Dynamic surface tension 4
Static surface tension 4
Slip 3
Prevent orange peel 2
0=unavailable 5=very effective
Package
25KG / 180KG
Go
Top