Additives and functional resins for coatings and inks
New energy, semiconductor additives
XOANONS® Dispersant
Dispersion and viscosity reduction of barium titanate slurry in water-based system
Identification of product
XOANONS®LD1217-20W
Materialization index
Item |
Index |
Test the method or the equipment |
Test standard |
Component |
Styrene maleic anhydride copolymer solution |
--- |
--- |
Appearance |
Red-brown transparent liquid |
--- |
--- |
Content |
20±3% |
Electric drying oven |
GB/T1725-2007 |
Density |
1.03- 1.07g/ml |
Specific gravity cup |
GB/T6750-2007 |
Dynamic viscosity |
10-50s |
|
GB/T1723-1993 |
pH |
7-10 |
Glass electrode method |
GB/T9724-2007 |
Refractive index |
1.362-1.367 |
Abbe refractometer |
GB/T6488-2008 |
Note: This indicator only represents the typical results, and is not regarded as a specification, mainly with specific COA.
Application area
Dispersion and viscosity reduction of barium titanate slurry in water-based system
Key property
?Provide spatial resistance, excellent viscosity reduction effect, and enhance the solid content of the slurry;
?Reduce slurry settlement, flocculation and other bad phenomena;
?Good storage stability.
Usage method
Add XOANONS® LD1217-20W to deionized water, stir and dissolve. And then add the slurry according to the formula to grind and disperse. The suitability of the dispersant system can be determined based on the dispersed particle size and viscosity of the slurry.
Suggested dosage
Add amount (purchased form) to inorganic powder: 1-10%
Storage stability
Seal and store away from light. Unopened in the original package for 24 months. Products beyond the storage period can continue to be used after passing the inspection. The container is not fully used and unprecedented, and must be closed immediately after use.
Pack
25kg
Go
Top